|
|
Ushio T-3 Quartz Halogen Lamps


We are an authorized distributor
for
USHIO America, Inc.'s
quartz halogen T-3 lamps.
Links to other products and
other types of quartz
heaters:
Ceramic Insulators
Electrical Power Wire
Optional Controls
Fostoria Replacement T-3 Lamps
Chromalox Quartz T-3 Lamps
Quartz Tubes

Lamp with 5.7" flexible nickel lead wires
Type T3 lamps utilize a low mass tungsten filament to provide a high temperature source that responds rapidly to voltage changes, thereby allowing precise control in steady-state or dynamic situations. Lamps are hermetically sealed and filled with an inert gas. The temperature of a T3 lamp operating at full voltage is approximately 4000ºF making its peak energy wavelength 1.15 microns. These lamps are available in several lighted lengths with wattage ratings of 100-200 watts per linear inch.

Sealed quartz tube with an internal tungsten element. When energized the lamp immediately comes up to full intensity. It is considered a short wave IR heater. This type of heater is very similar to a light bulb in that it generates a lot of light. They are only available in certain physical sizes as well as certain electric specifications. They are not readily custom made to order. All lamps are for horizontal burning position only except for part # 1001294, which may also be used in vertical burning position. Contact us about other lamps designed for a vertical burning position. Cotton gloves must be worn when handling quartz elements because bare hands contain oils and contaminants which deposit on the quartz sheath and cause hot spots and premature failure.
USHIO Quartz Infrared Heater (QIH) Lamps provide clean, instantaneous and precision controlled heat for use in applications such as baking, drying, curing, dehydrating or warming of foods or general area warming
USHIO Quartz Infrared Heater lamp is an example of efficiently utilizing the heat output of a specialty halogen lamp. Most of the output from this light source falls in the infrared region, and it is proven to be an extremely efficient heat energy source.Terminal Options:

S - Metal Sleeve with 5.7" (145 mm) flexible nickel lead wires

Click here for a larger image
Metal Sleeve with lead wires and ring tongue terminal

Click here for a larger image
B - Metal Clip Type Base

Click here for a larger image
E - R7s (Contact Type)

Click here for a larger image
D - Flat Ceramic Base with Lead Wire with spade tongue
terminal

Click here for a larger image
Flat Ceramic Base with Lead Wire with insulated wire

Click here for a larger image
Flat Ceramic Base with Lead Wire with no adhesive

C - No Metal Sleeve Base with Lead Wire

Click here for a larger image
Lead wires, no Metal Sleeve with ring tongue terminal

Click here for a larger image
L - Round Ceramic Base with Lead Wire
Base Part# i.e QIH240-1000/ plus Options Below (Suffix to Base Part #)

![]() |
|
Optional Controls |
|||||
|
Item ID |
Catalog # |
INPUT VOLTS | MAX. AMPS | KVA @ MAX RATED VOLTS |
Click "Select" below to see price our actual real-time quantity in stock |
| PAYNE10019 | 18D-2-10Hi | 240 | 10 | 2.4 |
|
| PAYNE10059 | 18D-2-10Hi with Enclosure | 240 | 10 | 2.4 |
|
| PAYNE10066 | 18D-2-30H | 240 | 30 | 7.2 |
|
| PAYNE10009 | 18D-2-30H with Enclosure | 240 | 30 | 7.2 |
|
| PAYNE10039 | 18D-2-80H | 240 | 80 | 19.0 |
|
| PAYNE10029 | 18D-2-80H with Enclosure | 240 | 80 | 19.0 |
|
|
We are a
distributor of infrared heaters for
thermoforming and
other industrial
processing,
comfort spot,
portable
and pet/animal
heating. |
|
Visit our other websites for home, office and factory non-infrared heating, fans and air conditioning: www.HeatersPlus.com and www.Fans-Plus.com. When you are ready to order you will be taken to our secure online ordering website: www.MorElectricHeating.com. |
|
MOR
ELECTRIC HEATING ASSOC., INC. |