|Home | Products | Accessories | Ordering | Contact Us | Search|
Quartz Twin Tubes and Accessories
Quartz Tube Elements
Fostoria Quartz Tube Elements
Twin Tube Mounting Hardware, Frames and Accessories
Twin tube medium wave infrared emitters offer a very high infrared emission, coupled with a fast heating and cooling response time. The twin-tube figure-8 cross-section allows emitter lengths up to 150" (3.81 m.) These emitters are available with and without an internal gold reflector. Wiring terminations are on both ends or one end only for low wiring and maintenance costs. They are designed with a figure eight profile cross section for these and other benefits.
|The emitters are available in the following two different cross section sizes:|
|a x b dimensions:||Tolerance of a:||Tolerance of b:|
|0.43" x 0.87"
11 x 22 mm
+/- 0.7 mm
+/- 1.5 mm
|0.59" x 1.18"
15 x 30 mm
+/- 1 mm
+/- 2 mm
Watt density is 65 watts/lineal inch maximum with gold reflector
Watt density is 120 watts/lineal inch maximum without gold reflector
Part #: Contact Us
Mounting Hardware, Frames and Accessories for Quartz Twin Tubes:
Single Tube Infrared Emitter End Caps and Other Assembly Components
Infrared Emitter Housings and Modules
Control Panel and Hardware
Laser Gold - Coated Reflectors
Single Bore Clear Fused Quartz Tubing
Part #'s: Contact Us
We are a distributor of infrared heaters. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2019 Mor Electric Heating Assoc., Inc.
ELECTRIC HEATING ASSOC., INC.