5880 Alpine Ave. NWComstock Park, MI 49321  USA
Tel 616-784-1121800-442-2581Fax 616-784-7775 • E-mail sales@infraredheaters.com


visit our other website for home/office/factory non-infrared heating: HeatersPlus.com

view cart

Solar Products Panel Heaters Mounting Options

Solar Products Flat-faced Radiant Panel Heaters
Solar Products, Inc.
228 Wanaque Ave 
Pompton Lakes, NJ 07442

We are a distributor for Solar Products, Inc.

STUDS
The mounting weld studs are commonly located on the back of the heater near each corner. As a heater length exceeds 36", then stud(s) are added in the center of the heater length. This is Solar Products preferred mounting option. The mounting studs size options are as follows:
 

WIDTH

LENGTH

1/4" x 20"

1/2"

3/4"

1"

1-1/4"

8mm

 

 

25mm

 

 
   
NUTS
The mounting nuts are commonly located on the back of the heater near each corner. As a heater length exceeds 36", then nut(s) are added in the center of the heater length. The mounting nut size options are as follows:
 

DESCRIPTION

AVAILABLE NUT SIZES

Snap-in Nut

1/4" x 20"

5/16" x 18"

3/8" x 16"

Compression Nut

1/4" x 20"

5/16" x 18"

3/8" x 16"

 
   
END PIECES
One last mounting option is the use of some special metal clips or brackets on the ends of the heater in lieu of the studs or nuts. This approach can simplify the heater installation for certain applications.
 
 

Home ] Up ]

view cart

We are a distributor of infrared heaters for thermoforming and other industrial processing, comfort spot, portable and pet/animal heating.  Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website.

visit our other website for home/office/factory non-infrared heating:

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NWComstock Park, MI 49321  USA
Tel 616-784-1121 800-442-2581Fax 616-784-7775 • E-mail sales@infraredheaters.com