|
Mor Quartz Tube Medium Wave
Heaters
Mor
Radiant Panels
which use these Quartz Tubes
Fostoria Quartz Tube
Elements
Chromalox Quartz Tubes
T3 Lamps and Bulbs
Fast responding and a very efficient
source of radiant energy. With heat-up capabilities of 45 to 50 seconds, and
complete cool down in approximately 15 seconds, this is an ideal heating device
for use in applications where frequent line stoppage occurs
where product under the heater could
be damaged because of a
heater that remains hot after the power is stopped, or
on/off cycles are expected or immediate heat-up and
cool down is essential.
Performance Capabilities...
 | Operating temperature up to 1600Ί F ( 870Ί C)
|
| Sheath watt densities up to 60 watts per linear inch
|
| Medium Wave / Medium Intensity |
Features...
| Quick delivery on replacement elements means less down time
waiting for parts. |
| Ceramic end caps are bonded to the end of the quartz tubing
to provide a rigid support for terminations. |
| Competitively priced. |
| Quick heat-up and cool down. |
| High operating temperatures permit fast thermal processes.
|
| No glare. |
| A clean thermal energy source. |
Applications...
| Thermoforming |
| Shrink packaging |
| Vulcanizing and curing rubber |
| Laminating |
| Sealing |
| Fusing processes |
| Sterilizing |
| Space heaters |
| Drying processes (coatings, textiles, photos, and sand core
castings). |
| Electrostatic copy equipment |
Technical Data...
| For a longer operating life and more efficient heating,
quartz heating applications should be rated around 35 to 45 watts per linear
inch. |
| Quartz heaters are designed for horizontal use only.
|
| The translucent quartz tube provides an infrared wave
length at an energy peak of 2.5 to 4.0 microns, when operating at full
voltage, and is suitable for most industrial applications. |
Two notes of caution:
- White cotton gloves should be worn when handling quartz
elements. Touching the elements with bare hands can leave oil and dirt from
the skin and contaminate the quartz sheath causing hot spots and premature
failure.
- Quartz heaters must not be operated in the presence of
combustible materials, such as vapors, gases or other flammable materials
without proper ventilation.
Radiant Heat Advantages:
| High Efficiency - Radiant Energy is created to directly
heat the product. |
| Lower initial cost - easy installation & maintenance
reduces equipment cost. |
| Close Product Temperature Control-Radiant Heaters can be
zoned to provide high heat in one area & low in another. |
| Cleaner environment - no product contamination because air
circulation in an infrared oven is minimal. Powder coatings & light weight
materials are quickly heated due to low volume of air & low velocities.
|
A high purity fused silica quartz sheath around a patented
resistance coil design provides a fast-responding, long lasting, efficient, high watt
density heater. Quartz tubes have a coiled nichrome wire inside of a quartz tube.
Ceramic end caps are cemented to each end of the quartz (the end caps hold the nichrome coil inside of the quartz tube). They respond much slower than a
T-3 quartz lamp, typically taking 45 seconds to reach full temperature. This type of heater is considered a medium to long wave IR heater.
Type F - Standard flag terminals - solid wire heavy gauge
with eyelet at the end. Standard on Quartz Tubes
used in our Mor Radiant
Panels
| 58" tubes - 54"
heated length, 1/2"
Dia. except E5835DD-F6
which is 5/8"
Dia. |
| E585A-F |
120 |
500 |
$89.64
 |
| E5875A-F |
120 |
750 |
$89.64
|
| E5810A-F |
120 |
1000 |
$89.64
|
| E5812A-F |
120 |
1250 |
$89.64
|
| E5815A-F |
120 |
1500 |
$89.64
|
| E585DD-F |
240 |
500 |
$89.64
|
| E5875DD-F |
240 |
750 |
$89.64
|
| E5810DD-F |
240 |
1000 |
$89.64
|
| E5812DD-F |
240 |
1250 |
$89.64
|
| E5815DD-F |
240 |
1500 |
$89.64
|
| E5820DD-F |
240 |
2000 |
$89.64
|
| E5830DD-F |
240 |
2500 |
$89.64
|
| E5835DD-F6 |
240 |
3000 |
$89.64
|
|
