|
|
|
|
Salamander Ceramic Infrared Emitters Technical Manual Page 11
Emitter Surface Temperature
The warm-up and cool-down curves shown below are based on the Salamander FTE style ceramic emitter. The curves for the Salamander HTE and LTE emitter can be approximated by using the following factors. If it is desired to know the time/temperature relationship for an HTE emitter, multiply the wattage of the desired HTE emitter by a factor of 2. That is, an HTE-500 will have the same temperature characteristics as an FTE-1000. If it is desired to know the time/temperature curves for an LTE emitter, multiply the wattage of the desired LTE emitter by a factor of .55. That is, an LTE-900 will have the same temperature characteristics as an FTE-500 (approximately). Note that the time/temperature curves are based on a single FTE emitter in a 70 °F (21 °C) ambient environment. When using the ceramic emitters in an array of multiple units the time/temperature curves can be significantly different.
Surface Temperature Warm-Up Time:
Single Emitter in 70 °F (21 °C) Ambient
Time in Minutes
Surface Temperature Cool-Down Time:
Page 10
Page
12 
Technical Manual Table of Contents
Technical
Manual in Acrobat .pdf format
|
We are a
distributor of infrared heaters for
thermoforming and
other industrial
processing,
comfort spot,
portable
and pet/animal
heating. |
|
Visit our other websites for home, office and factory non-infrared heating, fans and air conditioning: www.HeatersPlus.com and www.Fans-Plus.com. When you are ready to order you will be taken to our secure online ordering website: www.MorElectricHeating.com. |
    |
|
|
MOR
ELECTRIC HEATING ASSOC., INC. |
