 |
Salamander
Ceramic Infrared Heaters. Individual elements are 96%
infrared energy efficient with a maximum
temperature of 1292ºF (700ºC.) Standard
voltages are 120, 220,
230, 240 and 480
and standard
wattages range between 150 and 1000. |
 |
ALEX.
Aluminum extrusion housing case
pre-wired for 1-5 FTE
type ceramic heaters. The reflector is
polished stainless steel. Can be mounted in any direction, or side by side to make a
larger panel. |
|
Open Coil Element Metal
Infrared Heaters. Nichrome, Kanthal and other alloys.
Resistance wire open coil elements are used in vacuum forming /
thermoforming. Cut to length needed. |
 |
CRP Panel.
(Ceramic Radiant Panel) Our 12" x 12"
stainless steel modular reflector panel
with 3 LTE size ceramic heaters for a modular building block design or
as a stand
alone unit and can be mounted on angle iron gridwork. |
 |
Solar Products F-Series.
Industry standard in thermoforming and can be used in most
other process heating applications. |
 |
Quartz Tubes. Medium wave infrared
tubes. Heat-up time in 30-60 seconds, and cool-down
time is 15 seconds. Coiled nichrome wire inside of a quartz tube. 3/8",
1/2" and 5/8" diameters. Quartz tube source temperature to 1600°F |
 |
Solar Products M, G,
K Series. The G-Series heaters have also become an industry standard in thermoforming.
The M-Series heaters, with a hard-coated aluminum face has increased
durability of a metal face that is often required in the thermoforming
industry. |
 |
Solar Products FBA-Series. Similar to the F-Series heater, with holes drilled in the heater face to allow for forced airflow through the heater.
The purpose of the airflow is to provide combination infrared/convection heating.
The heater can be as wide as 24" (610mm) and as long as 72" (1829mm), though not this wide and long in the same heater. |
 |
Chromalox CPHI. High Intensity Quartz Flat-Faced Wide Area Radiant Panel Heater. High Intensity
Quartz Faced Radiant Heater, 1.6 - 4.8 kW, 240 and 480 Volt, 1750°F Max.
Emitter Temp., 10" Long x 4 - 12" Wide. Moisture Removal, Soften Plastics
prior to Thermoforming or Wherever Close Maximum Heat is Required |
 |
Solar Products Q-Series. As wide as 12" (305mm) and as long as 24" (610mm).
The QP model has a maximum watt density of 40 wsi (62
kw/m2). The QH model has a maximum watt density of 60 wsi (93
kw/m2). |
 |
Black Body Panel Heaters.
Comfort and industrial heaters. 90% Efficient. Heavy
Duty Stainless steel protective grid. Harshest industrial environments.
Available in 1, 2 and 4 feet lengths, Factories, Workshops, Construction
Sheds, Building Entrances, Loading Docks, Warehouses, etc. |
 |
Chromalox CP
Panel Heaters.
Flat-Faced Wide Area Radiant Panel Heaters.
Woven refractory
cloth with a black ceramic coating on the front. 0.55 -
18 kW. 120, 230, 240 and 480 Volt. 1650°F Max. Emitter Temperature. 6 -
60" Long x 12 - 30" Wide, Ink Drying and Spot Curing for Printing and Silk
Screening, Thermoforming and Vacuum Forming
or Wherever Close Maximum Heat is Required |
 |
Fostoria
U-Shaped Metal Replacement Elements. .430"
diameter Inconel metal sheath. Available wattages: 1800 to 4500W. Available
voltages: 120 to 600V |
|
Quartz Tube
Emitters.
Medium wave industrial heaters (Same size as ceramic heaters)
Quartz tubes running parallel to each other within a highly reflective
aluminized steel housing. Watt densities up to 30 w/sq. inch are
available. Small in size, and can easily be put in larger panels. |
 |
Quartz T3 Lamps. High intensity short
wave infrared lamps. 3/8" diameter clear quartz lamp
sheath, Standard 5.7" flexible lead wires, Short-wave infrared radiation
with a temperature up to 4,000°F. Sealed quartz tube with an internal
tungsten element. |
 |
Chromalox
Metal Sheathed Tubular Reflector Assemblies Heating
element in a housing assembly |
 |
Fostoria Quartz
T-3 Lamp Replacement Elements. 3/8" diameter clear
or red quartz envelope. Pigtail lead wires are approx. 6" length. |
 |
Chromalox
QR
Quartz Lamp Industrial Heaters.
Aluminum housing containing a highly polished aluminum
parabolic reflector. High temperature 3/8" diameter quartz lamp assembly
available up to 45 15/16" in length. 120, 208, 240, 480, 600 Volts, 0.5 -
3.8 kW, 4000°F (2204°C) max. source temperature |
 |
Chromalox
Type RTU Replacement Elements 3/8" Dia.
Heart Cross-Section. INCOLOY® Sheath. 400 - 6,500 Watts. 120, 208, 240,
275 and 480 Volt 1600°F Max. Sheath Temp. |
 |
Chromalox QRT Quartz
Tube Industrial Heaters.
Aluminum housing containing a highly polished aluminum parabolic
reflector. One 3/8" or 1/2" dia. quartz tube in lengths between 13 1/16"
and 103 7/8". Width is 3 11/16" (9.37 cm). 120, 240, 480 Volts, 0.35 to
4.3 kW, 1600°F (871°C) max. source temperature. 1.33 kW/sq. ft. (3/8"
quartz tube unit). 1.75 kW/sq. ft. (1/2" quartz tube unit) |
 |
Blasdel
Ceramic Generators.
Ideal for
wood, plastic, and other low temperature substrates. The durable nichrome
wire wound around a ceramic core is embedded in ceramic material and fired
in a kiln. |
 |
Fostoria
Quartz Tube Replacement Elements. Translucent
quartz as the enclosure. 5/8" diameter clear quartz envelope
Nickel-chrome alloy coiled element. |
 |
Black
Star Ceramic Band Heater. Black Star Radiant Ceramic Band
Heater. When used as an infrared heater (target material in hole),
it emits high efficiency infrared radiation because of the exclusive heat
resistant black coating. Up to 1000°F. Up to 480 Volts - 2" diameter
and up. 1 1/2" width and up (in 1/2" increments) |
|
Blasdel COR
Coil-O-Rod Generators. Powder
coating, baked enamels, moisture dry off, softening plastics for
compression molding or vacuum forming, degreasing, etc. Exceptionally long
service life. On average, one can expect about 10,000 hours, however much
longer is not uncommon. |
 |
Quartz Twin Tubes. Medium wave industrial
heaters. Very high infrared emission. Emitter lengths
up to 150". Watt density is 65 watts/lineal inch maximum with gold
reflector and 120 watts/lineal inch maximum without gold reflector |
 |
Chromalox
Quartz Tubes.
3/8" and 1/2" quartz tubes. 0.35 to 4.3 kW, 120,
240, 480V, Overall lengths for 3/8" dia. tube from 13 1/2" to 41 1/2",
Overall lengths for 1/2" dia. tube from 13 1/2" to 99 1/2" |
 |
Mor Quartz Tube Radiant Panels Reflectors are stainless steel,
panels are fully insulated and pre-wired to your specifications.
4, 12, 18 or 30" wide x
24, 36,
48, 60 or 72"
Long |
|
Quartz Tubes. Medium wave infrared
tubes. Heat-up time in 30-60 seconds, and cool-down
time is 15 seconds. Coiled nichrome wire inside of a quartz tube. 3/8",
1/2" and 5/8" diameters. Quartz tube source temperature to 1600°F |
 |
Solaira Commercial High Output (HOS) 1,500
or 3,000 Watt
Indoor/Protected Outdoor Quartz Heater
designed for a wide variety of commercial, industrial and hospitality
applications: covered patio’s, under awning, windy/cold reception
area’s, zone Heating in retail, Warehouse, assembly line area, process
heating. Long life emitter (5000 hour). Available in single
or
double emitter options. 6’
of cable (no plug) |
 |
Mor Quartz Tube Aluminum Extrusion Panels. 3¾” Wide
x 24, 36, 48, 60 or 72" Long. Rigid extruded
aluminum housing protects element from harsh industrial environments.
Complete, Ready-To-Connect Assembly. |
