 |
Controls,
Thermostats and Sensors.
Digital process temperature controls. Portable Controls. Snow and Ice detection
and Heater Controls. Non-Contact Sensors. |
 |
Thermostats for Portable Heaters, In-line
thermostats. Line Voltage with Plug and Cord |
 |
Ceramic Wire
Connectors. A cone connector for high
temperature applications. Ribbed design for easy
use. Used in electrical, heating and cooking appliances. Large skirt opening
permits fast wire entrance during hand or power drive assembly.
Rated 300 volts maximum. Listed as pressure type connectors for joining
solid and/or stranded wire |
 |
Insulation (Ceramic Fiber) Alumina-silica insulation.
1" or 1/4" thick x 48" wide.
Blanket recommended for use in infrared
panels. Flexible and lightweight.
|
 |
Ceramic
Terminal Blocks - High Temperature Make wiring connections to heaters
efficient and easy with a touch safe design. 1 Pole, 5 Amps. 2 Pole,
15 Amps. 3 Pole, 15 Amps. 4 Pole, 15 Amps. Fitted with Nickel plated brass connectors, they can withstand
482°F (250°C)
|
 |
Ceramic
Terminal Blocks - Very High Temperature.
Make wiring
connections to heaters efficient and easy. 2 Pole,
32 Amps. 3 Pole, 32 Amps.
Fitted with Stainless Steel connectors, they can withstand
long term temperatures of 900°F
(500°C) and can withstand 1292°F (700°C) during short time periods. |
 |
Terminal Connections (Ring, Spade and Slide Terminals and
Butt Connectors) High-temperature non-insulated terminals made of alloy
steel and nickel plated for temperatures up to 900°F (482°C).
|
 |
Protective
Sleeving (Fiberglass) Used for secondary insulation of electrical wires in
high temperature applications.
Heat Treated Fiberglass Sleeving is a Class C
insulation material. It is a closely woven 100% fiberglass construction for
applications where temperatures run as high as 1200° F. The sleeving
provides maximum abrasion resistance with high flexibility. |
 |
Electrical Power Wire
MG and TGGT sizes 4 gauge through 22 gauge, 600 volt, 842°F (450°C), fiberglass overbraid.
|
 |
Tape (Fiberglass and Aluminum)
Fiberglass cloth or aluminum tape roll with a pressure-sensitive adhesive
backing. Fiberglass cloth tape roll with pressure-sensitive
thermosetting silicone adhesive. |
 |
Thermocouple Wire 20 gauge,
thermocouple grade stranded wire and extension grade wire
|
 |
Sil-A-Blend 250 Electrical Power Wire
Stranded
high temperature power wire with a silicone rubber
coating. 600 volt, 482°F
(250°C) |
 |
Ceramic
Insulators hold metal coils. 120-480 Volt.
Maximum safe operating temperature is 2000°F (1093° C) |
 |
Thermocouples,
Temperature Sensors and RTD's (Resistance Temperature Detectors).
Precision Insulated Thermocouples, J, K, T and E Calibrations, Made From Special
Limits of Error Wire, Available in 36 and 72" Lengths, Convenient 5-Packs
|
 |
Ceramic Beads. Interlocking Insulation Beads (Steatite C220) for
protecting power lead wires. |
 |
Infrared Sensors Non-contact temperature detection.
Pre-Calibrated Infrared Thermocouples, Stainless Steel, Mounting holes with
screws, Airpurge/Aircool |
